banner
Home > News > How to choose an Industrial Videoscope Probe?
How to choose an Industrial Videoscope Probe?

The probe is an important part of the industrial videoscope, and its quality directly affects the detection effect. Therefore, when we choose probes, we must choose according to different testing environment.


On the one hand, if the detection environment is a uniform pipe and hole, the diameter of the probe is generally not greater than the 4/5 of the pipe and hole. If it is a pipe and hole with uneven inner diameter, the diameter of the probe is generally not more than the 2/3 of the average inner diameter of the pipe and hole, and the minimum bending radius of the probe. The bending requirements of the products should be met.


On the other hand, when we choose the probe, we choose the larger diameter probe in order to improve the clarity of the detection. At the same time, if the detection environment is the bus with low hardness and high surface roughness, we should choose the plastic outer layer probe in order to avoid the scratching of the workpiece by the probe.



Copyright © 2003-2018 Shenzhen Coantec Automation Technology Co., Ltd.     E-mail : flora@chinavideoscope.com
service online

Service Online

13686866495

13686866495